The disassembly of the dust filter cartridge with six lugs is usually relatively simple. The following are the general disassembly steps:

Preparation work

- Safety protection: Before carrying out the disassembly operation, be sure to cut off the power supply of the equipment first, and take appropriate safety measures, such as wearing gloves, masks, etc., to prevent dust and potential hazards.
- Tool preparation: Usually, only some basic tools, such as wrenches and screwdrivers, need to be prepared in case screws or nuts may need to be loosened during the disassembly process.

Disassembly steps

- Loosen the fixing devices: The dust filter cartridge with six lugs is generally fixed inside the dust collector through fixing devices such as nuts, buckles or clamping disks at the six lugs. Use corresponding tools, such as wrenches or screwdrivers, to loosen these fixing devices.
- Rotate or pull out the filter cartridge: For the six-lug quick-release filter cartridge with a clamping disk, just gently rotate the clamping disk to separate the filter cartridge from the clamping disk, and then pull the filter cartridge out of the dust collector; if it is a filter cartridge fixed by nuts or buckles, directly pull out or remove the filter cartridge after loosening the fixing devices.
- Precautions: During the disassembly process, operate carefully to avoid damaging the filter cartridge and the internal structure of the dust collector. If the filter cartridge is installed tightly, you can gently shake the filter cartridge to loosen it before disassembling, but be careful not to use excessive force to avoid damage.